Austriamicrosystems has announced the AS1130, which it claims is the most advanced and smallest dotmatrix LED driver (channels vs. PCB space) available. The AS1130 drives 132 LEDs but requires only 5 mm² PCB space, reduces external component count, allows use of cheap connectors and requires fewer PCB (printed circuit board) layers. Benefits for end users include up to 80% longer battery lifetime, more colourful effects and smoother running animations.
Using a 12×11 cross-plexed technique, the AS1130 LED driver is targeted for dot-matrix displays in mobile phones, toys, small LED displays in personal electronics, but also non-battery powered household goods, indoor public information displays, and industrial applications such as power meters.
The AS1130 drives 132 LEDs, each with an 8-bit dimming control and no external resistor required. Additionally, an 8-bit analogue current control allows fine tuning of each current source to compensate for different brightness of different colours, or to adjust the white balance on RGB LEDs.
It incorporates 36 frames of memory for small animations or for use as a buffer to reduce host processor load, saving energy and processing time. The AS1130 LED driver can also extend battery life by controlling an external power supply (e.g. charge pump) which is required when LEDs need a higher voltage than the battery can supply, allowing continuous operation even under low battery voltage conditions.
In addition to the ultra-small sized CS-WLP-20, the AS1130 LED driver is also available in a gull winged SSOP-28 package, allowing easier handling in applications that are not so space sensitive. This makes the AS1130 a perfect replacement for indoor high pixel density video walls, easily replacing up to eight 16-channel PWM LED drivers, or reducing the complexity of externally (user designed) multiplexed systems.
Only 12 lines are required to drive all 132 LEDs. This is accomplished with austriamicrosystems’ multiplexing technique called cross-plexing. It reduces line count on the PCB as well as pins on the connectors, saving space & costs. Other features include control via a 1 MHz I²C compatible interface, open and shorted LED error detection, and low-power shutdown current.
The AS1130 LED driver operates over a temperature range of -40 to +85°C and a wide 2.7 to 5.5 V power supply range.