Ipetronik presents push button with CANbus output

With IPEbutton, Ipetronik offers a compact, smart accessory for its measurement systems. IPEbutton outputs a predefined message to the CANbus once the illuminated push button is pressed.

Depending on the type of the device, it is used to initiate an offset adjust or a shuntcheck for M-SENS and SIM-STG modules. Other applications include send requests to receive signal values from a sensor (“polling”), start a storage group of a data logger configuration and IPEmotion online measurement.

Picture: Ipetronik

IPEbutton is housed in black powder-coated aluminum enclosure with an IP54 protection rating and dimensions of 50 mm x 50 mm x 25 mm (W x D x H). It requires a voltage supply between 9 VDC and 36 VDC. The trigger button is suitable for an operating temperature range from -40 °C to +85 °C at a relative humidity of 5 to 95 %. Output data is transmitted at up to 1 MBit/s via two CANbus interfaces as defined in ISO 11898-2. Optionally, cables with Lemo connectors are available.


This entry was posted in Uncategorized. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s